Adhesives
GECO GRIPLOCK
MULTIPURPOSE CONSTRUCTION ADHESIVE
GECO GripLock is a one-part, high-grab construction adhesive-sealant that bonds without nails, screws, or clamping. It cures on contact with atmospheric moisture into a tough, elastic bond and holds firmly across a wide range of construction surfaces. GripLock’s high initial grab takes hold the moment two surfaces meet, and does the work of nails, screws, clamps, and double-sided tape – in a cleaner, faster, more dependable way to hold what is built.
Strong Grab
UV & Weather Resistant
Permanently Elastic
Non-staining
Non-corrosive
Non-sag & Non-slump
Paintable
How to use?
Step 1
Load and Cut
Insert the cartridge into a caulking gun and cut the nozzle to the required bead size.
Step 2
Apply
Lay adhesive in a zig-zag pattern or in dots on one surface, roughly 1 inch apart. On large panels, leave a margin of about 35 mm to control squeeze-out.
Step 3
Bond
Press the surfaces together firmly and hold for 2-3 mins. For heavy elements support with brackets and allow to cure overnight.
Step 4
Finish
Remove uncured adhesive; cured adhesive can be trimmed with a sharp blade. Paintable after curing.
Step 1
Load and Cut
Insert the cartridge into a caulking gun and cut the nozzle to the required bead size.
Step 2
Apply
Lay adhesive in a zig-zag pattern or in dots on one surface, roughly 1 inch apart. On large panels, leave a margin of about 35 mm to control squeeze-out.
Step 3
Bond
Press the surfaces together firmly and hold for 2-3 mins. For heavy elements support with brackets and allow to cure overnight.
Step 4
Finish
Remove uncured adhesive; cured adhesive can be trimmed with a sharp blade. Paintable after curing.
